The Researcher's Guide to Bluesky

If you’re reading this you probably know the emerging social network Bluesky has had an explosion of popularity. I wanted to set up a profile for my library, but I needed it to be worth it - we needed a critical mass of University of York people there to rebuild our former Twitter network.

With that in mind I decided to adapt a Bluesky guide I’d written on here, to make it a guide for Researchers - the idea being to make it as easy as possible for people to make the switch. In other words, I’ve tried to help catalyse the change I needed in order to justify putting time into Bluesky, and I think overall this approach actually worked!

Because the guide was aimed at academics in particular, I sought input from academics at York who were already on the platform. Would you like to be in a York Starter Pack I asked them, and do you have any tips for your peers? They were all terrifically enthusiastic about the idea for the guide, and gave lots of useful quotes - the researcher perspective was essential, so I’m grateful to them all. I also got permission from the Central Comms Team at the University to do this in the first place, sharing a draft with them and adding some pointers around policy which they wanted included.

1: The Researcher’s Guide to Bluesky

>> Here, then, is the Researcher’s Guide To Bluesky.

It’s published on my library’s blog rather than on here because I wanted it to be seen as an ‘official’ output of the Library & Archives. I promoted it via staff newsletters, asking the Central Comms Team to add it to their Bluesky guidance, and of course going back to each and every York academic I’d spoken to about the platform to share a link with them.

I also used it to launch the library’s Bluesky account. I thought this would be good - you can’t beat being USEFUL to hit the ground running on a new social media platform - but considering we had no followers and Bluesky doesn’t have a centralised algorithm to push content towards people, I’m fairly stunned about how much engagement we got. At the time of writing it is exactly three weeks since we posted a link to the guide (as part of a larger thread outlining its key points) and we’ve had over 600 reposts and 750+ Likes - plus so, so many replies, pins, and messages of thanks.

We've written a Researcher's Guide to Bluesky! It's a bit like all those other useful guides to Bluesky, but with several useful insights from University of York academics about using the platform, and we'd love it if it was reposted far and wide... >> blogs.york.ac.uk/library/2024... 🧵 below

[image or embed]

— University of York Library (@uoylibrary.bsky.social) November 13, 2024 at 12:17 PM

The great thing about the guide doing so well is it exposed us to new followers (including York people who may not otherwise found us), established some credibility for us as an account worth listening to, and literally brought more researchers to the platform which was of course the main driver for writing it in the first place. We now have around five-and-a-half thousand followers after 21 days - on Twitter we had around 7,500 (before Musk took over and everyone left) but that took us 12 years, and engagement was way lower than it is on Bluesky.

As successful as the guide was, the fact is the York blog on which it was posted isn’t well known enough for people to just randomly stumble across it - you need to be sent there via a link in an email or a Bluesky post, realistically. I wanted to reach more researchers through an existing authority with an established network, to get more eyes on the guide - so I pitched a version to the LSE Impact Blog for Social Sciences. You’re probably familiar with this but if you’re not, the key thing to know is it has completely out-stripped the original purpose that gave it its name! The blog has become a sort of academic hub for ideas and practical guides for people across all disciplines in Higher Education.

2: How to get started on Academic bluesky

>> Here, then, is How To Get Started With Academic Bluesky.

The above is a shorter version of the first guide, due to the Impact Blog’s word-count limit - it has the York-policy-specific parts omitted, and is generally leaner. It also benefits from some helpful suggestions given to me by Michael Taser, the Managing Editor (the final paragraph in particular) and in general I prefer this edition of the guide.

This version has also had a great reception and achieved the aim of reaching more people, hopefully bringing more researchers to the platform (which will in turn make it more useful for the York academics, meaning more of THEM will come to the platform, meaning the time WE are putting into it becomes more worthwhile, and so on and so on). Certainly the greater reach of the Impact blog has helped a lot - it’s had probably around 150% of the views of the original guide.

As more and more libraries started to appear on the Bluesky as part of its November popularity surge, it was inevitable that I’d end up writing yet another iteration…

3: The Library Guide to Bluesky

>> Here, then, is the Library Guide to Bluesky.

The edition is published here on this blog because it’s written ‘as me’, rather than as the library itself. This is a culmination of what I’ve learned and applied from writing the other guides, with some advice on actual content thrown in there as well.

Again I’d like to reach a wider audience than I can get to on this blog alone, so I’ve pitched a version to Library Journal and we’ll see what they say. Speaking of pitches…

4: a bluesky guide for academic departments and professional services

>> Here, then, is the University Guide to Bluesky.

I pitched a guide to the Times Higher (for whom I’ve written a couple of pieces previously), again on the grounds that reach will be higher there than here, with my target audience. This version is organisational rather than individual, and very much HE in nature - although much of it could apply across the cultural sector.

And that will be that - no more Bluesky guides from me (almost certainly!) and all bases covered. Taking experiences and chunking them up into (hopefully useful) guidance for others has always been one of my favourite things, so I’ve actually really enjoyed this whole Bluesky business… One reply I got to a Bluesky post sums up why it’s worth the time to write these:

“So appreciated!!! From little tips to engagement and the starter packs. You have no idea how helpful this is when you’re doing this in addition to the ‘day job’ but also trying to inform/advocate for your colleagues/researchers that you support in a newish area of social media! Bravo!!”

— A Researcher Engagement Team

The Library Guide to Bluesky

During November 2024, the social network Bluesky underwent a significant transformation. What had been a platform where a few libraries set up experimental profiles with mixed results, suddenly became a space where many libraries were achieving substantial engagement.

In short, Bluesky has reached a critical mass, with enough users leaving Twitter and joining the platform for it be considered a legitimate X-replacement. This shift makes it worth considering setting up an account for your institution. At one point Bluesky saw a million new users joining daily: for libraries—and cultural organisations in general—this presents a unique opportunity to rebuild communities that have become harder to reach elsewhere.

There are plenty of examples of libraries finding success on Bluesky to draw inspiration from. I went from considering Bluesky to be brilliant for librarians but perhaps not yet suitable for libraries themselves, to seeing an explosion of library success that changed my mind. My own library has been on Bluesky for just over two weeks, and we've seen engagement levels far exceed what we experienced on Twitter over the past two years, as shown below.

If you’ve not seen Bluesky before, the first thing you’ll notice is how similar it is to Twitter in look and feel

And it’s not just us: others have posted comparisons showing engagement is much higher - and more positive - on Bluesky, and newspapers are finding click-throughs to their articles are way higher than on Twitter or Threads also, because links are not suppressed on the newer platform (see info on the lack of algorithm, below).

We’ve built a following quickly too, and while it’s not (yet) quite as big as our ex-X community was, it only took us 9 days to reach the total number of followers we had on Twitter after 9 years! Here’s how the first week went:

Our following numbers were helped by a very popular post (shown in the previous screenshot): a researcher’s guide to Bluesky. Being entertaining is good but being USEFUL is what leads to a larger following

So if you’re a cultural organisation and you’re either new to Bluesky, or considering setting up a profile, what do you need to know? Here’s a library guide to Bluesky: 13 tips to help you hit the ground running.

The big picture stuff

1. Learn from the organisations already active on Bluesky

You may be familiar with ‘Starter Packs’ on Bluesky - this is simply a curated collection of accounts, which you can follow all in one go. Use these to get a good idea of how comparable institutions are using the platform, and steal some of their ideas! I’d recommend pressing the ‘follow all’ button then unfollowing selectively as you go.

I’ve tried to think about what would be most useful for a nascent Bluesky library account, and settled on sector-by-sector Packs as the way forward so you can see what your immediate peers are up to, what sort of content works and gets engagement, and who is already having success. If you fall into the categories below and are not on these lists, tell me on Bluesky and I’ll add you!

Here they are:

• The Academic Libraries Bluesky starter pack. Of all the sectors in libraries, the academic sector appears to be having the most success on Bluesky so far. This is not because of the nature of the content they’re posting, I don’t think - there’s just a lot of the academic community moving to the platform already.

  If you work in an academic library, my uncomplicated recommendation is to get off Twitter, and get on to Bluesky.

  Hopefully this starter pack will provide some inspiration from the libraries already making it work. (Please note there are also three other packs particularly relevant to this sector, none of which I created: the Open Research pack, and the University Presses pack, and the Archives and Special Collections pack.)

• The Public Libraries Bluesky starter pack. This sector is starting to make its way on to the platform, although at the moment there’s a few libraries grabbing the username but not actively posting. In UK terms the two social media behemouths in public libraries are of course the British Library who have not been on Bluesky too long but have already amassed 20k followers, and Orkney who have only been here for 4 days but already past 5k! I love both those libraries and their social media output, but would caution against using them for too much inspiration as their huge followings and cultural cache slightly set them apart from an especially copyable model… I’d recommend checking out Hull Libraries as an example of a newish public library account making the platform work well. (I also see some public libraries having success with Threads, and would recommend choosing one platform or the other rather than spreading your time too thin across both.)

• The Health Libraries Bluesky starter pack. Medical and health libraries are starting to arrive now, and I’ll keep adding them to this pack as they do - it will be interesting to see whether Bluesky or Instagram are the best use of the social media time available.

I’m yet to see enough School Libraries, Law Libraries or other Special Libraries to create Packs for those sectors - that will hopefully change over time. You’ll find recommendations for librarian (rather than library) starter packs in this separate guide.

2. Set up your profile fully before engaging

Every Bluesky guide I’ve read (or written!) says this but I still see loads of accounts falling into the trap of following people before doing their profile. I get it, you’re excited to connect… But trust me you’re missing opportunities: accounts with generic avatars and no biography or introductory text are often perceived as likely to be bots, so users often don’t follow back and sometimes auto-block. Please sort your profile, and write an introductory post, before going on that following spree. It’s well worth it.

3. Get yourself into relevant Starter Packs

Getting into Starter Packs is a great way to accelerate follower growth, especially early on. It may happen on its own, but it’s best to be proactive - just ask the owners of packs to add you! That’s not some sort of breach of etiquette; speaking for myself I want to hear from you and make the packs more useful.

A very popular pack which is great to be on if possible is The MERL’s Arts & Culture pack which gets huge engagement; look locally for Packs created by parent organisations or local groups too. You can search for packs to follow and potentially to join, in the Bluesky Directory.

4. Create Starter Packs of your own that will help your community

One of the best things to ensure enough of your community is on Bluesky to make it worth your while to set up a profile, is to help that audience move from Twitter. I’ve done this in a couple of ways for my library - one is to write the Researcher’s Guide to Bluesky, which proved to be a very popular early post with over 500 reposts so far, and which I’ve got into all the relevant staff newsletters etc. The other way to create a University of York Starter Pack, so people from the institution can instantly find and connect with each other.

I’d highly recommend you do one or both of these things early on - create a Starter Pack if the need for one exists, which is helpful for your community; and if applicable write a guide for that community (e.g. ‘the healthcare professionals guide to Bluesky’ or whatever is relevant).

5. Know your target audience, and create content for them (not for other librarians!)

This is essential social media advice regardless of platform. We need to know why we are there, and who we are there for. In my case, I consider Instagram and TikTok to be fabulous ways to reach University of York Students, so I’m crafting the stuff we put on Bluesky specifically for academics and researchers. Other people may enjoy it too which is great, but I’m using the account with a specific target audience in mind - and if I find I’m getting engagement from other libraries or info pros, and NOT from the target audience, I will tweak the content I’m putting out!

6. There’s no centralised algorithm so be proactive. Follow, reply, repost and engage

Bluesky is very Twitter-like in lots of functional ways: you can post up to 300 characters at a time, you can repost, you can Like, and so on. The crucial difference is the lack of algorithm on Bluesky’s default ‘Following’ feed. There’s no endlessly auto-refreshing content, just posts from the people you follow, in reverse chronological order. That’s it. So you need to follow a bunch of people to make your feed useful, and then start getting involved: join in conversations, ask questions, repost useful things, hit the Like button. In essence - this sounds pretentious I know - the aim is to cultivate community rather than just broadcast your library news.

The details

7. Make it accessible

Finally, a platform that offers alt-text for video as well as images! Thank you Bluesky. I’d recommend accessing Settings, find the Accessibility section, and toggle the switch marked Require alt-text before posting and you can create accessible content every time. Here’s a great resource on how to write alt-text descriptions.

8. Don’t be afraid to block and otherwise moderate your experience

One of the reasons for the notable lack of toxicity on Bluesky compared with Twitter is the moderation options are extensive and they actually work. Blocking is very powerful, muting words is effective, you can detach your own post from a Repost you’re not comfortable with, and so on. Make the most of all this baked-in protection.

9. for most libraries it’s probably worth having your Direct Messages open to all

The point above about moderation notwithstanding, ideally users should be able ask you questions via a DM even if you don’t follow them. The toggle-switch you require to enable this is not in Settings, but rather in the Chat area itself.

10. The question you need to ask yourself as a social media admin is not: what should I post about my org? It’s: what is my community interested in?

Often the best way to build community online is to post a mixture of things about your organisation, and things relevant to or adjacent to your organisation. For example, this post was popular among our target audience because it was about York - there was no informational or promotional message involved, and that’s fine.

We’re back! Today in #York aesthetics news, today’s vibe is rainsoaked but sunny.

[image or embed]

— University of York Library (@uoylibrary.bsky.social) November 25, 2024 at 10:29 AM

11. Don’t be afraid to explore ideas in a bit more detail

Brevity is great but it’s not the be-all and end-all - threads work well here. As well as posting a link to our Researcher’s Guide we also explored the contents in a thread and that really helped increase engagement.

We've written a Researcher's Guide to Bluesky! It's a bit like all those other useful guides to Bluesky, but with several useful insights from University of York academics about using the platform, and we'd love it if it was reposted far and wide... >> blogs.york.ac.uk/library/2024... 🧵 below

[image or embed]

— University of York Library (@uoylibrary.bsky.social) November 13, 2024 at 12:17 PM

12. Posting first thing is probably best avoided

You often get organisations posting 8:30 - 9:30 in the morning because it’s the only time the person doing the social media has any time (and as yet Bluesky lacks an in-built scheduling tool) but in my experience so far, it’s best to wait until later in the day as more people seem to be around. At least give it until mid-morning to post anything important, if you can.

13. Images are important, despite this being a (rare) text-based platform

Don’t get me wrong, they’re not essential like they are on Insta - but if you can add context or character to a post using a picture or video, do so. Engagement will likely be higher.

---

I hope the above is helpful, and I also hope it doesn’t make anyone feel pressured to get onto Bluesky if they’re not ready! It seems to be staying the course as a platform and growing all the time, so if you need a few months to get permission and management buy-in and ideas together and all that stuff, it will still be here waiting for you when you’re properly ready. (And of course, if you want a bespoke workshop on it, get in touch with me…)

There are various versions of this guide aimed at different audiences. If you’re looking at Bluesky more as an individual, this blogpost on ten top tips for joining may be helpful.

I’ve already mentioned the Researcher’s Guide To Bluesky above - a leaner, more efficient and less Yorky version of this appears on the LSE Impact Blog here and lots of people have said the tips apply to more than just researchers and academics.

I may yet produce a Uni Department’s Guide to Bluesky just to complete the set, but for now do leave a comment or get in touch if you have any further advice to add, or any questions.

And finally, whilst I have some caveats when recommending Bluesky to libraries (especially if you’re not an academic library) I really have no hesitation in recommending it to librarians and anyone who works in libraries. It’s proving in some ways to be better than Twitter ever was, and I really value the community there. If you haven’t already, join us!

Bluesky is the one! 10 top tips for joining the growing social media platform

Bluesky is great, and it’s really starting to build now: in fact in under two months it has doubled to 12.5 million users [edit - since I wrote this 5 weeks ago it’s doubled again, to 24 million!]. It’s especially good for individuals seeking to rebuild their professional and personal networks away from the toxicity of Twitter. If that’s you, or you’re just new to the platform and wanting to make the best of it, here are ten top tips.

1) Fill out your profile first.

Generic avatars and profiles without bios give off bot vibes and generally won’t be followed - so before you start showing up in people’s notifications feed as you follow them, give them a reason to follow you back. Put in a bio, put in a pic (even if it’s not of you), put in a link if you have a website or another social media profile you’d like to highlight, and ideally write a post or two as well so people know what you’re about.

2) In some ways, it works just like Twitter.

You can post up to 300 characters in one go, you can post videos, images, links, gifs and emojis. You can reply, you can Like, you can repost, you can direct message. It looks just like Twitter too.

3) In this crucial way it does not work like Twitter: there’s no algorithm.

You know how on every other platform, you think: why oh why can’t it just show me posts from the people I follow, in reverse chronological order? Well I have good news for you: that is exactly what Bluesky’s default ‘Following’ feed does. However, it is a complete outlier in this respect: nearly every other popular social media platform does some version of showing you content you’ve not asked to see, and it actually takes a lot of getting used to when that isn’t provided. There’s a slower pace of life than on Twitter or Insta where your feeds have a literally ENDLESS auto-refresh going on - this reduced activity is something I’ve really learned to enjoy. But when you’re new, if you don’t get out there and follow a bunch of people, your feed will be completely dead. So with that in mind…

4) Be proactive: follow people.

For Bluesky to be of any value to you at all, you need to follow people whose posts make your feed interesting and worthwhile. There’s a number of ways you can find people to follow:

• Use Skyfollower bridge to follow the same people on Bluesky you used to follow on Twitter: I actually wouldn’t personally recommend doing this but a lot of people find the option very useful

• Find people who post content you like, and look at who they follow. I’m a big fan of cannibalising people’s follower lists, it both helps you find people you know and opens up new horizons

• Use Starter Packs. These are curated sets of accounts, usually on a theme, which anyone can create. If, like me, you work in the library industry, a Starter Pack like Alice Cann’s UK Library and Information People would be a great way to follow lots of relevant industry people in one go. The MERL have created a pack that includes libraries, museums and galleries too. I’ve now created Starter Packs for Academic Libraries, Public Libraries and Health Libraries.

• Make the most of custom feeds - these are curated feeds on a given topic. Unlike a List which is just all the posts from all the people on the list, posts only get added to custom feeds when people use the right emoji and have been added to the feed: so for example the ‘Skybrarians’ feed is a great place for info pros to find each other and share relevant posts. There’s even a custom feed for gifted articles (gift links that bypass journalistic paywalls for e.g. the New York Times). You can also use the ‘Discover’ and ‘Popular with friends’ feeds (both default tabs on your Home screen) to find new people to follow

• Simply search for topics you care about, and follow the people posting interesting things about them

Whatever you do, do SOMETHING. There have been people who join Bluesky and simply wait for something to happen. Because of the lack of algorithm, nothing does happen without proactivity, so they say ‘Bluesky is dead’ and then leave. This is a real shame! Cos it’s great.

5) Be proactive. Like, reply, and engage.

All those cliches about how you get out what you put in really apply here. You have to go beyond broadcasting and truly engage: reply to other people’s posts, join in conversations, cultivate discussion. I follow an author and illustrator called Debbie Ridpath Ohi on Bluesky, and she wrote a great post of tips for those new to Bluesky, which I’d recommend you read here. In it she posted this cartoon which sums up the whole thing perfectly. Be the two on the right!

Thank you to Debbie for giving me permission to reproduce this here. Click the pic to go to the blogpost it appears in

6) make the most of the moderation tools.

Good moderation and the ability to control who you interact with has been baked into Bluesky from the start, and it makes such a difference. Unlike on Twiter (even good old days Twitter) when you block someone they are gone completely - if they leave a comment on your post and you block them, you won’t see the comment and no one else will see the comment either. And it’s not just that you can’t see the posts of the person you blocked; they can’t see yours either, or even replies to them. And if someone Quote posts you and you don’t like it, you can detach your post from theirs so they’re no longer associated. Same with Replies. Not only that, you can subscribe to blocklists (e.g. this one) which really do starve problematic groups of the oxygen they need. It’s basically the opposite of Twitter, where, famously, hope goes to die.

7) make your own alt-text mandatory.

We all know it’s essential to add alt-text to images but sometimes you can be too quick to post and forget. Access Bluesky’s Settings, find the Accessibility section, and toggle the switch marked 'Require alt-text before posting’ and you can create accessible content every time. You can also add alt-text (and indeed captions) to videos - finally a social network which offers this! Here’s a great resource on how to write alt-text descriptions, if you want to brush up.

8) A mix of professional and personal is good.

This is by far the most subjective of these tips, so feel free to ignore it completely. But for me I think this kind of social media works well when you use it for professional purposes, but with a little personal thrown in too. If it’s all work, people don’t get to see who you are so you may not build relationships. If it’s all personal, you miss out on that fabulous opportunity for peer-support and ideas and discourse beyond the walls of your office. So, if you feel comfortable doing so, post some stuff about your hobbies as well as your job!

9) give it time.

You will not get instant results on Bluesky, but it’s worth the wait. It really feels a lot like Twitter before it went bad. Don’t give up too early; it takes to rebuild a community and spending two desultory months here and then two more distracted months on Mastodon and then giving Threads a half-hearted go is really the long way round…

10) enjoy it while it lasts!

I don’t want to end on a negative but listen: enshittification comes for us all. To quote Wikipedia:

Enshittification (alternately, crapification and platform decay) is a pattern in which online products and services decline in quality. Initially, vendors create high-quality offerings to attract users, then they degrade those offerings to better serve business customers, and finally degrade their services to users and business customers to maximize profits for shareholders.

Right now Bluesky is in the ‘creating high-quality offerings to attract users’ stage, and they genuinely seem to care about things like moderation and protecting us all, and it’s a great place to be a part of. The more popular it becomes, the more expensive it will be to run, and we may start to move down the curve marked ‘enshitify’ - so let’s make the most of this phase. We’ve probably got a good few years, and the community is worth your time. Let’s do this.

---

Notes:

• as always I’ve love this post to become more useful by other people contributing ideas. If you have more Bluesky tips, leave them in a comment!

• this is about using Bluesky as an individual - I’ve since written a few other guides for different audiences. Here’s the Researcher’s Guide to Bluesky on my library’s blog, here’s Getting Started On Academic Bluesky for the LSE Impact Blog, and here’s the Library Guide To Bluesky (aimed at institutions) on this site

• the particular blue sky at the top of this blogpost was captured by me in the Pentland Hills near Penicuik, a town in Scotland, where the landscape is beautiful and the sheep look quite angelic when backlit

New article for Times Higher on how to get your library / museum / charity etc to become ex-X

I very much think it’s time we got out organisations off Twitter / X, and I’m delighted to say there’s a real movement happening in that direction.

Since I wrote this blogpost about how to get your organisation off X and a shorter LinkledIn version which has had a lot of repostings, absolutely loads of people have got in touch from across librarianship and beyond, to say they’ve put the 5 suggested steps into practice and are getting off the platform.

I particularly loved this reposting from Angela Hursh, author of the Super Library Marketing blog:

“Here’s what happened when I stopped posting to Twitter:

✔ Traffic to my website remained the same.
✔I felt less stressed with one less platform to maintain!
✔I regretted nothing.
”

— Angela Hursh

In order to try and reach an audience beyond my usual networks, I’ve re-written the piece for the Times Higher, and it sits somewhere between the two versions above in length. If you’ve not already read one of the others, have a look and see if you can start the process of becoming ex-X.

Click the pic to view the article on the Times Higher website

If you’re interested you can read my previous piece for the Times Higher on how departments and orgs can get better at using Instagram, here.

It's time: how to get your organisation off Twitter / X

In previous posts on becoming ex-X I’ve stopped short of saying *everyone should* leave the hellscape formerly known as Twitter. Mainly because people have built up networks which may not be re-creatable elsewhere, and they were there before Musk came along, so why SHOULD they have to move? But recent events have made me question this, especially when it comes to libraries, museums, archives and Higher Education.

I saw this post from Kevin Gannon on BlueSky which sums it up about right:

I have been leery about unilateral declarations on what people should or shouldn't do about Twitter, bc I know there are networks that have been built there which are irreplaceable. But at this point, I just don't see any way one can ethically use that site. www.independent.co.uk/news/uk/poli...

[image or embed]

— Kevin Gannon (@thetattooedprof.bsky.social) Aug 7, 2024 at 15:15

Musk is actively encouraging division, and helping to incite riots. He’s spreading far-right conspiracy theories. He’s talking about civil-war in the UK. There is simply no other circumstances in which our organisations would be complicit in using, and therefore encouraging use of, a platform whose owner not only espouses such dangerous views but uses the platform itself to amplify them. Our presence on X is an implicit endorsement. We shouldn’t be there.

So how do you get off Twitter? For what it’s worth here’s what I’ve done with my library.

1: Set a date, and tell people

As tempting as it is to leave now, we need to give our users time to hear that we’re leaving, digest this, and make alternative plans to get news from us. In January this year I decided @UoYLibrary would leave Twitter by the end of August, so we had a clean break for the new academic year.

The long lead-in time has been helpful. I wrote a briefing paper for senior leadership in February explaining why we were doing this, and shared it with the comms group, which led to some really good suggestions as to how to mitigate the impact, more on which below. We also announced our intention to leave Twitter on Twitter itself in July, so our audience there had time to get used to the idea and follow us on alternative platforms. It says it in our bio as well as our pinned tweet.

We’ve since reposted about this news, and have now done a nice little ‘favourite twitter moments’ round-up thread of some semi-viral tweets and nice interactions we’ve had over the years. These were nice to revisit in and of themselves - we’ve loved being there for 99% of the time - and will also serve to get the word out to more Twitter users before we go.

2. Consider creative ways to mitigate the impact on your Twitter audience

What do we lose by leaving Twitter? You can think about it in terms of both content (we tweet about this, and that) and audiences (those people will be fine because they follow us on Insta, these people won’t because they don’t see messages elsewhere).

Content-wise, we’ve had some lovely creative times with Twitter over the years, but as it’s become more broken and less functional we’re really reduced use of it to basic status updates - building A is closing early today, resource B is now available, service C launches today etc. So we’ve built a library status page (which we’re encouraging people to bookmark) that tells them this info without needing Twitter.

@uoylibrary So is #SatisfyingLibraryUpdates going to catch on? Well here’s one: with info on student curators, 24/7, a new exhbition and our sensory rooms which are opening soon. #unifyork #library #sensoryrooms #libinspo #librariesoftiktok #studytips #UoYTips #satisfying ♬ original sound - Uni of York library

We use Instagram Stories (see the pinned examples on our profile here) to say the sort of things we’d previously have put in Tweets, and occasionally use TikTok for general updates too, so of course we’re encouraging our Twitter audience to follow us there if they use those platforms.

[Sidenote: I’ve invented - actually I’m sure I didn’t really invent it and lots of people to do this - a way to get news updates via the video medium called ‘satisfying updates’ where I use the duet function on TikTok to give the students something satisfying to look at whilst sticking around long enough to hear key updates from me…]

Then we come to audience - in very simple terms almost all of our undergraduates are on Insta and TikTok between them so we know they’re well covered. PGTs are increasingly on Instagram too, and more and more Researchers are heading there. Academics are, for us, the problem audience that we can’t reach easily without Twitter - they’re not all going to the same place when they leave Twitter, and while BlueSky shows promise it isn’t there yet in terms of a critical mass of York academics using it. So we’ve spoken to the central University comms team and asked if they’d be willing to tweet perhaps three or four really important things about the library each year (things like 24/7 opening for exams) which they’re happy to do, and we’ll make sure our more internal marketing routes, such as the ones offered by the Faculty Librarian Team I co-manage, step up too.

Obviously your audiences may be completely different to ours if you’re not an academic library - so use all the data you have to try and work out which demographic is most reliant on Twitter for info about your org, and see if there’s any other way to reach them. Don’t rule out non-social media options too - one of the things we’re going to do is put more posters up in the colleges where all the PGRs are!

3. Make sure you turn off Grok data sharing

Twitter recently activated an on-by-default, unannounced, data-sharing setting where everything you’ve ever tweeted can be used to ‘train’ Grok, Twitter’s stupid LLM AI bot thing. You don’t want that. No one wants that. Get it in the bin.

If anyone's wondering how things are going on the hellsite: This setting was just turned on by default for everyone. if you still have an account with content, go log in and disable this so Grok can't use your tweets as training data. Direct link: twitter.com/settings/gro...

[image or embed]

— Corey (@coreyjrowe.bsky.social) Jul 26, 2024 at 03:17

Here’s the direct link to the Settings to turn data sharing off - it works on desktop but not, I hear, on mobiles.

4. keep the account

I’ve wrestled with this a bit - any social media account that is out there in the world is, in effect, a front window for your organisation. So keeping an account alive even when it’s not active is problematic - people may still send DMs which will go unanswered; people could find old tweets and reply to them and we wouldn’t see it, etc. However, I don’t want to lose the account name and let someone else take it and potentially impersonate the library, and there is of course a tiny, tiny possibility that Twitter may one day be habitable again, so I’ve decided it’s better to keep the account.

A final decision I need to make on this whether to lock it when we leave. At the moment I’m leaning towards locking, to reduce the chances of new people seeing the account, missing all the ways we’ll try and flag that it’s not active, and then trying to get help or guidance we can’t give by asking questions on the platform. Which brings us to…

5. Make it really, really obvious the account is no longer active

Subtlety is not your friend here. I’ve seen professional accounts who’ve left without changing their bio - we really need to make it unquestionably obvious we’ve left.

Here’s what I did with my own account when I left Twitter:

So that checklist of ways I’ve tried to flag I’m not there, in full:

• Says it in my name

• Says it in my bio

• Says it in the banner pic

• Says it in the pinned tweet

I must confess I don’t know if this has worked or not, because I’ve not logged back in since I left. I tried recently, to disable to the Grok AI LLM thing mentioned above, but it requires 2FA I can’t get without logging in, so I’m stuck… I don’t know, therefore, if there are loads of DMs or people @ing me and thinking I’m rude for not replying - I hope there aren’t, and I’ve done everything I can to avoid that. I’ll be doing the same with @UoYLibrary in a couple of weeks.

finally: How much do we explain why we’re leaving?

A decision I’ve not yet made is, do we write a library news post where we fully go into the details of why we’re leaving? I’d be genuinely interested to know what people think about this, if you fancy leaving a comment below.

Obviously the pro is, we’re a library, we’re taking an ethical stance, and we want our users to know about it. We want them to get the reasons why. I was speaking to a librarian at another organsiation whilst doing some social media training recently, and she said as a parent she’d be really proud of her kid’s University doing this.

The con is, quite honestly, opening up the possibility of a prolonged debate with some Musk fans, and using up comms bandwidth we REALLY need for other things on the sort of conversations where everyone gets angry but no one changes their mind. (Classic Twitter-these-days conversations, in fact.) It’s also hard to talk about why you’re leaving without sound judgemental towards the people choosing to stay, and we have no wish to be judgemental. So as of right now, I don’t know if there’ll be a big rationale-reveal type post, or we’ll just leave it at ‘Twitter is no longer working for us’.

---

Since we announced we’re leaving Twitter we’ve not had any negative feedback about it. We left Facebook a couple of years back - with not a single complaint from anyone - and it is genuinely freeing to be on one less platform. As pretentious it sounds, social media benefits from your creative energy needing to be split fewer ways, in my experience. I was confident becoming ex-X was the right thing to do for our library when I first decided it at the start of year, and I’m still confident now - what’s more we’ve done some really useful things to lessen the negative impact on our users.

I’d recommend taking the steps above, and doing the same. If anyone is interested in the rationale briefing paper I wrote for our Leadership Team send me an email and I’ll share it with you; here’s how it ends.

By stopping our use of X from September, we will be upholding our values, adapting to the changing landscape of social media by jettisoning a platform no longer delivering value, and freeing up capacity to work on more impactful communications.